How To Remove Oil Stains From Teak Wood?

Teak wood is that kind of a material that we use for many purposes. But if there will be an oil stain on it, then it will be a bit difficult to remove that.

But you can do it if you have some good knowledge about it. And to get the proper knowledge, you have to know how to remove oil stains from teak wood.

Well, we are going to describe some useful ideas of removing this kind of stains. And to know more about it, check the methods in details.

How To Remove Oil Stains From Teak Wood

4 Easy Methods of Removing Oil Stains from Teak Wood

Removing oil stains from teak wood might be a tricky task as a teak wood absorbs oil quickly. And that’s why you need to be sure what procedure will work on the stains.

And to know the effective methods and the procedures of it, let’s get right into the detailed descriptions of every method.

Method 1: Detergent Solution

Detergent is a cleaning solution that works on almost all types of materials. Whether it’s fabric, steel or wood, you can use detergent to clean that place out.

And in the case of teak wood, you can also use this ingredient. So, let’s see what the actual procedure is.

Step 1

At first, you need to blot the stained area. And for doing that, you need to use paper towel or a clean cloth. You can use newspaper too. 

Use a pressing motion to do the blotting. Keep pressing on that stained area until the oil will be soaked completely.

Step 2

After that, you need to make the solution. And to prepare it, you will need warm water. Take a bowl and add the water in it.

And then add some mild detergent into it. Stir the mixture well to dissolve the detergent and the solution will be ready.

Step 3

Now, take a cloth and dip it into the mixture to get soaked. And then, clean the stained area with it. Rub the area properly to get stains away. It can easily take away the stains. 

But if the stains are tough then you can use a soft brush to rub the place with it. 

Step 4

After finishing cleaning, take another clean cloth and clean the area properly. You can also rinse that place for a better cleaning. Or wipe it out with a wet cloth. 

And that will help to clean all the leftover of the oil. And also, it will remove the stains too. 

Step 5

And these steps are enough to remove oil stains. But you also need to be sure whether the area is being dried after the cleaning or not. 

And to do that, you need to do nothing. You just leave the wood in that same place so that, it can dry in the air properly. And that will take the stains away completely.

Method 2: Use Ammonia

Using ammonia is another effective way to get rid of any kind of stain. But to do that, you need to be sure about the applying procedure of it. 

And for that, you must follow the rules of using it. To know all the rules and regulations, let’s see the technique in detail first.

Step 1

Make the mixture first. And to do it, take a bowl and pour 4 parts of hot water into it. And then, take 1 part of ammonia and mix these two elements well. 

You have to be sure of the temperature of water. It has to be hot but not boiling hot. So that, it will not make any cremations with ammonia.

Step 2

After that, take a cloth and soak it by dipping it into the solution. The cloth should be soaked properly. So that, you can apply the mixture well. Also, wring out the excess water to easily wipe out.    

After that, clean the stained area with the cloth. Slightly rub that place to remove stain. You can use a soft brush to do it properly until the stains are gone.         

Step 3

Repeat the process until the stains are completely gone. And if you do it in a proper way, then the stains will definitely gone. So, make sure you follow the rules. 

Step 4

Now, take a clean cloth and wipe out the excess. Also, you can use a wet cloth or go for rinsing. That will clean the wood completely and you can use it again.

Step 5

Last but not the least, dry the wood after finishing the washing of it. So that, the material of it will be fine. And no damages will be occured. So, make sure you do that thing properly.

Method 3: Linseed and Gum Turpentine

When it’s about removing the oil stains from teak wood, you can take another method and that is to use a solution of linseed and gum turpentine. 

It can do a great job if you use it properly. Let’s see the procedure first. 

Step 1

At first, make the solution in a proper way. And to make it, take a bowl and take 4 tablespoons of linseed oil and 2 tablespoons of gum turpentine. Mix three ingredients well. 

Make sure you use boiled linseed oil to make the solution. Now, mix the ingredients properly to make the appropriately.             

Step 2

After that, soak a cloth in this mixture to wipe out the area. Make sure you soak properly and then squeeze out the excess. That will help to wipe out the stained area in a proper way. 

Now, wipe out the area that has stains. Use a brush if the stains are tough to remove. But do not rub it too hard. And you will see the stains will start fading away. 

Step 3

Repeat the wiping procedure if you think the stains are not gone yet. Keep doing it until the stains are gone. And when the stains are gone, now you can stop the wiping procedure. 

Step 4

After finishing the removing the stains, now take another clean cloth and clean the excess solution out of it. And if the wiping cannot dry the surface then keep it like that for some time to air dry. And then, you can use it again. 

Method 4: Mineral Spirits 

Mineral spirits will also be a good solution to do the removing process. In the case of teak wood, it will be helpful to remove any kind of stain including oil stain. 

But there is a using process that you need to know. And what are they? Let’s find out! 

Step 1

Starting with selecting the proper mineral spirit, you can use any of them. You can use paint thinner, or any other kinds of oil as well. It will help to take any kind of grease or oil away from the wood. 

Step 2

So, to use it, take a soft cloth and soak it with spirit. Squeeze the cloth to remove excess solution. After that, wipe out the areas well. That will remove the stains.

Step 3

Repeat the processes until the stains are fading away. And after the stains are gone, you can now let the wood be in place for some time to dry. So that, you can use it again like before.

Pro Tips of Removing Oil Stains from Teak Wood

  1. When you are working with chemical or something like that, make sure you must wear gloves 
  2. Do not use too much hot water 
  3. Make sure the brush you are using for rubbing is not hard, otherwise it can make scratches 
  4. While using ammonia, take a test on a small part of the wood because it might cause discoloration sometimes 

Final Words 

There are also other kinds of methods that are effective. We are just sharing some of them. And we must say, these techniques are also incredible to remove oil stains. 

No matter what procedure you use, it should work properly and fulfil your purpose. And if you want to know about this, then you need to know how to remove oil stains from teak wood properly.      

And after learning all about it, now you can start the process and remove the stains and get rid of the trouble. Hope you find better results and don’t forget to share your experience of using the methods!             

Jessica Alba

Jessica Alba is passionate about home improvement and design. As a child, she grew up helping her dad renovate their childhood home. Many of her skills came from this experience. Jessica loves DIY projects and sharing her passion for home design with others since she lives in Los Angeles.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts